{"product_id":"maretron-mpower-clmd12-12-channel-dc-load-controller-module-with-nmea-2000-interface","title":"Maretron MPower CLMD12 12-Channel DC Load Controller Module with NMEA 2000 Interface","description":"\u003cp\u003e\u003cstrong\u003eMPower 12 Channel DC Load Controller Module with NMEA 2K - No Connectors\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eDesigned for vessels of all sizes with smaller loads, the MPower CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps, and four handle a maximum of 5 amps, with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eIf a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzerV3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc.\u003c\/p\u003e\u003cp\u003eThe CLMD12 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.\u003c\/p\u003e\u003cp\u003eFor manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eNMEA 2000 Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000, eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eTwelve (12) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003e2 breakers capable of carrying up to 12 Amps\u003c\/li\u003e\n\u003cli\u003e6 breakers capable of carrying up to 10 Amps\u003c\/li\u003e\n\u003cli\u003e4 breakers capable of carrying up to 5 Amps\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF, or PREVIOUS STATE)\u003c\/li\u003e\n\u003cli\u003eBreakers can be locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eSeven (7) discrete inputs configurable as Active High or Active Low\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eRemote control of navigation lights\u003c\/li\u003e\n\u003cli\u003eRemote control of boarding lights\u003c\/li\u003e\n\u003cli\u003eBurnt-out bulb alerts\u003c\/li\u003e\n\u003cli\u003eControl of area lights with dimming\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lumZRk ---\u003e\n\u003cp\u003eThe Maretron CLMD12 is a compact and versatile 12-channel DC load controller designed for marine applications, providing reliable management for various electrical loads on vessels of all sizes. Its robust design incorporates twelve electronic circuit breakers (ECBs), with two capable of handling up to 12 amps, six rated for 10 amps, and four supporting 5 amps, offering a total current capacity of 75 amps. The module supports paralleled circuits, enabling flexible load management to suit different electrical demands. Each breaker can be individually configured to trip at lower current thresholds using Maretron's N2KAnalyzerV3 software, allowing tailored protection for smaller circuits or sensitive electronics.\u003c\/p\u003e \u003cp\u003eThe CLMD12 includes inputs for up to seven hard-wired switches, which can be used to control breaker states or serve as inputs for other data signals such as bilge alarms or hatch position indicators. This integration capability enhances vessel automation and safety. The module is compatible with various DC loads, including lighting, pumps, motors, and electronic devices, making it suitable for a wide range of onboard systems. Its ability to report the current draw of each breaker facilitates proactive maintenance by identifying overcurrent faults or undercurrent issues like burnt-out bulbs.\u003c\/p\u003e \u003cp\u003eDesigned for marine environments, the CLMD12 features an IP67 rating for water and dust resistance and is ignition protected to prevent sparks in hazardous areas. It is opto-isolated from the NMEA 2000 network, eliminating ground loop issues and ensuring signal integrity. The module supports configurable breaker power-up states—ON, OFF, or previous state—and allows breakers to be locked against inadvertent operation. For manual load control, an optional MPower 12-Channel Bypass Module (CBMD12) can be added. Overall, the CLMD12 provides a comprehensive solution for remote load management, circuit protection, and system monitoring, enhancing vessel safety and operational efficiency.\u003c\/p\u003e \u003cp\u003eWhether managing navigation lights, controlling area lighting with dimming, or receiving alerts for burnt-out bulbs, the Maretron CLMD12 delivers precise control and monitoring capabilities. Its integration with NMEA 2000 networks ensures seamless communication with other marine electronics, making it a vital component for modern vessel electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNMEA 2000 Interface for seamless network integration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIP67 rated enclosure for water and dust resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIgnition protected design ensures safety onboard\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOpto-isolated from NMEA 2000 to prevent ground loops\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwelve dimmable electronic circuit breakers (ECBs) for on\/off control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo breakers support up to 12 amps, six support 10 amps, four support 5 amps\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIndividual breaker electrical current monitoring for system diagnostics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConfigurable breaker power-up states: ON, OFF, or previous\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBreaker locking feature to prevent accidental actuation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeven discrete inputs configurable as Active High or Low\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAutomatic ECB overcurrent shutdown for safety\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOvertemperature protection through thermal shutdown\u003c\/li\u003e\u003c\/ul\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":44528573874218,"sku":"107975","price":468.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/2285\/8794\/files\/107975XL.jpg?v=1783037785","url":"https:\/\/atticusgoods.com\/products\/maretron-mpower-clmd12-12-channel-dc-load-controller-module-with-nmea-2000-interface","provider":"Atticus Goods","version":"1.0","type":"link"}