{"product_id":"procom-powerjet-fuel-controller-pe-pj-002-for-efficient-fuel-management","title":"PROCOM PowerJet Fuel Controller PE-PJ-002 For Efficient Fuel Management","description":"\u003cdiv\u003e\n\u003ch1\u003ePROCOM PowerJet Fuel Controller PE-PJ-002\u003c\/h1\u003e\n\u003cp\u003ePowerJet PE-PJ-002 lets you tune fuel delivery with ten selectable settings (-4% to +10%), including a stock setting, for immediate throttle response when you push your engine with a sport exhaust or high-demand track conditions.\u003c\/p\u003e\n\u003cp\u003eIt reads outside air temperature near the stock AIT sensor and alters the signal sent to the ECU to use the ECU’s built‑in Air Temperature Correction factor. The outcome is a slightly cooler intake signal that causes the ECU to inject more fuel consistent with the chosen PowerJet setting.\u003c\/p\u003e\n\u003cp\u003eUnder constant load, the oxygen sensor will steer the fuel ratio back toward stock. When you demand more power, the system switches back to open loop and applies the selected adjustment, delivering quicker throttle response.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward: plug it in between the stock AIT sensor and the bike’s wiring harness using the included exact plug‑in connectors. Typical setup takes a few minutes, and the unit is designed to sit under the bodywork, rugged and waterproof for durability.\u003c\/p\u003e\n\u003cp\u003ePowerJet is engineered to optimize fuel flow and engine performance across various applications, with durable construction for harsh environments and compatibility with multiple fuel systems. It also supports reduced emissions and improved efficiency.\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003eCompact design for tight installations\u003c\/li\u003e \u003cli\u003ePrecise fuel flow regulation to boost engine efficiency\u003c\/li\u003e \u003cli\u003eDurable construction for reliable operation in harsh environments\u003c\/li\u003e \u003cli\u003eCompatibility with various fuel systems\u003c\/li\u003e \u003cli\u003eSupports improved engine performance and reduced emissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePowerJet comes with a full one-year warranty.\u003c\/p\u003eMost fuel injected engines run very lean and this is fine except for when demanding maximum power output on the track, especially when you have sport exhausts installed. Being able to simply adjust the fuel\/air ratio in those conditions would be wonderful wouldnt it?\u003cbr\u003e\u003cbr\u003eThe PowerJet Fuel Controller allows just that! You can adjust the fuel map from -4% to +10% by selecting one of the 10 settings. We even incorporated a stock setting which means no change compared to stock.\u003cbr\u003e\u003cbr\u003eOur PowerJet is a simple yet complicated device. It measures the outside air temperature very close to where the stock sensor is located, and adjusts the signal from the OEM air temperature sensor to the ECU to make use of the built in Air Temperature Correction factor that is built into every stock ECU.\u003cbr\u003e\u003cbr\u003eWhat this accomplishes is that the ECU is told that the intake air is a little cooler than it is, and the ECU will respond by injecting a fraction more fuel depending on the PowerJet setting. You as a rider will notice a substantially improved engine response when you twist the throttle.\u003cbr\u003e\u003cbr\u003eThe neat thing is that when under constant load (constant speed) the oxygen sensor in the exhaust will make the ECU correct the fuel\/air ratio back to stock! However, as soon as the system notices an increase in power it switches from closed loop (oxygen sensor feedback) back to open loop (no feedback) and will correct the fuel\/air ratio by the amount you selected on the PowerJet.\u003cbr\u003e\u003cbr\u003ePowerJet can be easily installed by plugging it in between the stock AIT sensor which is usually located somewhere on the airbox and the bikes wiring harness. Each PowerJet comes with the exact plug in connectors and installation will normally only take a few minutes. Finding the air temperature sensor usually takes more time than plugging in the PowerJet.\u003cbr\u003e\u003cbr\u003eYou can leave the PowerJet sitting under the bodywork somewhere as it is designed to be rugged and waterproof. After figuring out what setting works best with your specific engine\/exhaust\/intake combination you typically would leave it alone.\u003cbr\u003e\u003cbr\u003ePowerJet comes with a full one year warranty.\n\u003cp\u003eThe PROCOM PowerJet Fuel Controller PE-PJ-002 is engineered to optimize fuel flow and improve engine performance across various applications. Designed for reliability and precision, this fuel controller ensures consistent fuel delivery, contributing to better engine efficiency and lower emissions. Its compact size makes it suitable for installation in tight spaces, providing a seamless integration into existing fuel systems. Crafted with durable materials, the PowerJet Fuel Controller withstands harsh operating conditions, making it a dependable choice for demanding environments. Whether used in industrial machinery, generators, or other fuel-powered equipment, this controller offers enhanced control and operational stability. Easy to install and maintain, it supports ongoing system performance and longevity, helping you reduce downtime and maintenance costs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eCompact design for easy installation in limited spaces\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003ePrecise fuel flow regulation to optimize engine efficiency\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003eDurable construction for reliable operation in harsh environments\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003eCompatibility with various fuel systems for versatile application\u003c\/li\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003eSupports improved engine performance and reduced emissions\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PROCOM","offers":[{"title":"Default Title","offer_id":44638032855082,"sku":"773-523","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/2285\/8794\/files\/773-523.jpg?v=1785436686","url":"https:\/\/atticusgoods.com\/products\/procom-powerjet-fuel-controller-pe-pj-002-for-efficient-fuel-management","provider":"Atticus Goods","version":"1.0","type":"link"}