{"product_id":"rule-rule-mate-2000-gph-12v-fully-automated-bilge-pump-with-intelligent-sensor","title":"Rule Rule-Mate 2000 GPH 12V Fully Automated Bilge Pump with Intelligent Sensor","description":"\u003cb\u003eRule-Mate 2000 GPH 12 Volt Fully Automated Bilge Pump\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Rule-Mate 2000 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1\/2\" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5\/8\". \u003cbr\u003e\t\t\u003cbr\u003e\u003cb\u003eRule-Mate Intelligence\u003c\/b\u003e\u003cbr\u003eRule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to \"check\" for water every 2-1\/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1\/2\" and shutting off at 5\/8\".\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e2000 GPH (7570 LPH) at 0' (13.6V)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll-in-one pump and switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtra long life heavy duty motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\" NPS discharge with 1\" AND 1 1\/8\" screw-on ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e \u003c!--- cis2:m2lumZRk ---\u003e\n\u003cp\u003eThe Rule Rule-Mate 2000 GPH bilge pump combines powerful performance with advanced automation features, making it an essential component for marine safety and maintenance. Designed with a robust heavy-duty motor, this pump delivers up to 2000 gallons per hour at 13.6 volts, ensuring rapid water removal from your vessel's bilge area. Its all-in-one design integrates the pump and switch into a single unit, simplifying installation and reducing the need for additional components. The 1-inch NPS discharge port, compatible with 1-inch and 1 1\/8-inch screw-on fittings, allows for versatile connection options to your bilge plumbing system. This pump is engineered to operate reliably over extended periods, backed by a three-year warranty for peace of mind. Its compact dimensions enable easy fitting into tight spaces, while its lightweight design minimizes vessel load and improves handling during installation or service. The Rule-Mate 2000 GPH pump features an intelligent circuit board that activates when water reaches 2-1\/2 inches and automatically shuts off when water drops below 5\/8 inches, maintaining optimal bilge conditions. Notably, the pump includes a unique sensing feature that detects when it is running without pumping water, such as debris fouling or air-bound conditions, and pauses operation to protect the motor and battery life. Once the obstruction is cleared, the pump resumes normal function, providing continuous, reliable bilge management. This intelligent functionality enhances vessel safety by preventing unnecessary wear and potential damage. For detailed installation and operation instructions, refer to the owner's manual available online. Please note, this product contains chemicals like formaldehyde, which are regulated by California's Proposition 65, and users should review safety information accordingly.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePowerful 2000 GPH flow rate at 13.6V for rapid bilge water removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAll-in-one design integrating pump and automatic switch for simplified installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHeavy-duty motor designed for extended service life\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e1-inch NPS discharge port compatible with 1-inch and 1 1\/8-inch screw-on fittings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntelligent circuit board that senses water level and pump operation status\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAutomatic activation at 2-1\/2 inches of water and shutoff at 5\/8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBuilt-in protection feature that detects when the pump runs without pumping water to prevent damage\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompact size suitable for tight installation spaces\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree-year manufacturer warranty for long-term reliability\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rule","offers":[{"title":"Default Title","offer_id":44529820958762,"sku":"53261","price":265.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/2285\/8794\/files\/53261XL.jpg?v=1783088708","url":"https:\/\/atticusgoods.com\/products\/rule-rule-mate-2000-gph-12v-fully-automated-bilge-pump-with-intelligent-sensor","provider":"Atticus Goods","version":"1.0","type":"link"}