{"product_id":"victron-energy-multiplus-ii-48-5000-70-95-120v-inverter-charger-with-powercontrol-and-powerassist","title":"Victron Energy MultiPlus-II 48\/5000 70-95 120V Inverter\/Charger with PowerControl and PowerAssist","description":"\u003cp\u003e\u003cstrong\u003eMultiPlus-II 48\/5000 70-95 120V\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MultiPlus-II is a multifunctional inverter\/charger with all the features of the MultiPlus, plus an external current sensor option that extends the PowerControl and PowerAssist function to 100A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePowerControl and PowerAssist - Boosting the Capacity of the Grid or a Generator\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).\u003c\/p\u003e\u003cp\u003ePowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate for insufficient generator, shore, or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSolar Energy: AC Power Available Even During a Grid Failure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MultiPlus-II can be used in off-grid as well as grid-connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo AC Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe main output has no-break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore\/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.\u003c\/p\u003e\u003cp\u003eThe second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater, for example, can be connected to this output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVirtually Unlimited Power Thanks to Parallel, Split Phase, and Three Phase Operation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUp to 6 Multis can operate in parallel to achieve higher power output. Six 48\/3000\/35 units, for example, will provide 15 kW \/ 18 kVA output power with 210 Amps charging capacity.\u003c\/p\u003e\u003cp\u003eIn addition to parallel connection, two units of the same model can be connected for a 240V split phase output, and three units of the same model can be configured for three-phase output. But thats not all: up to 6 sets of three units can be parallel connected per phase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn-Site System Configuring, Monitoring, and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSettings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed).\u003c\/p\u003e\u003cp\u003eSeveral monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, and Digital Multi Control Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote Configuring and Monitoring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstall a Color Control GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowerControl  PowerAssist: Yes\u003c\/li\u003e\n\u003cli\u003eTransfer Switch: 95A\u003c\/li\u003e\n\u003cli\u003eMaximum AC Input Current: 95A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInverter Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDC Input Voltage Range: 39 -66 V\u003c\/li\u003e\n\u003cli\u003eOutput: Output Voltage 120 VAC  2% \/ Frequency 60 Hz  0,1% (1)\u003c\/li\u003e\n\u003cli\u003eContinuous Output Power at 25C (3): 5000 VA\u003c\/li\u003e\n\u003cli\u003eContinuous Output Power at 25C: 4000 W\u003c\/li\u003e\n\u003cli\u003eContinuous Output Power at 40C: 3700 W\u003c\/li\u003e\n\u003cli\u003eContinuous Output Power at 65C: 3000 W\u003c\/li\u003e\n\u003cli\u003ePeak Power: 9000 W\u003c\/li\u003e\n\u003cli\u003eMaximum Efficiency: 96%\u003c\/li\u003e\n\u003cli\u003eZero Load Power: 15 W\u003c\/li\u003e\n\u003cli\u003eZero Load Power in AES Mode: 10 W\u003c\/li\u003e\n\u003cli\u003eZero Load Power in Search Mode: 3 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCharger Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAC Input: Input Voltage Range 90-140 VAC \/ Input Frequency: 45  65 Hz\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Absorption': 57,6 V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Float': 55,2 V\u003c\/li\u003e\n\u003cli\u003eStorage Mode: 52,8 V\u003c\/li\u003e\n\u003cli\u003eMaximum Battery Charge Current (4): 70 A\u003c\/li\u003e\n\u003cli\u003eBattery Temperature Sensor: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAuxiliary Output: Yes (42 A)\u003c\/li\u003e\n\u003cli\u003eExternal AC Current Sensor (optional): 100 A\u003c\/li\u003e\n\u003cli\u003eProgrammable Relay (5): Yes\u003c\/li\u003e\n\u003cli\u003eProtection: a  g\u003c\/li\u003e\n\u003cli\u003eVE.Bus Communication Port: For parallel, split phase, and three phase operation, remote monitoring and system integration\u003c\/li\u003e\n\u003cli\u003eGeneral Purpose Com. Port: Yes, 2x\u003c\/li\u003e\n\u003cli\u003eRemote On-Off: Yes\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40 to +65C (-40  150 F) (fan-assisted cooling)\u003c\/li\u003e\n\u003cli\u003eHumidity (Non-Condensing): Max 95%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial  Color: Steel, blue RAL 5012\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP22\u003c\/li\u003e\n\u003cli\u003eBattery-Connection: M8 bolts\u003c\/li\u003e\n\u003cli\u003e120 V AC-Connection: Screw terminals 35 mm (2 AWG)\u003c\/li\u003e\n\u003cli\u003eWeight: 32 kg \/ 71 lb.\u003c\/li\u003e\n\u003cli\u003eDimensions (hxwxd): (mm) 676 x 330 x 164 \/ (inch) 26.6 x 13.0 x 6.5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eListings: UL1741 pending\u003c\/li\u003e\n\u003cli\u003eSafety: EN-IEC 60335-1, EN-IEC 60335-2-29, CSA 22.2 107.1-16\u003c\/li\u003e\n\u003cli\u003eEmission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Note: For a short period of time this product was called MultiGrid-II\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lumZRk ---\u003e\n\u003cp\u003eThe Victron Energy MultiPlus-II 48\/5000 70-95 120V is a versatile inverter and charger designed to deliver reliable power in both off-grid and grid-connected systems. Featuring a maximum continuous power output of 5000 VA with an impressive peak power of 9000 W, this unit ensures your electronic devices operate seamlessly during power fluctuations or outages. Its robust design includes a built-in transfer switch rated at 95A, allowing quick switchover in case of grid failure, with an ultra-fast transfer time of less than 20 milliseconds.\u003cbr\u003e The MultiPlus-II excels with its PowerControl and PowerAssist functions, which intelligently manage power sources by preventing overloads on grids or generators. An external current sensor extends these capabilities to 100A, enabling the inverter to draw in extra power from the battery to support peak loads or compensate for insufficient generator or grid power, then recharge the batteries when demand decreases. This dynamic power management makes it ideal for complex energy systems that require load balancing and efficient energy use.\u003cbr\u003e Compatible with solar energy systems, the MultiPlus-II can operate in off-grid or grid-tied configurations, supporting solar chargers and grid-tie inverters. It provides two AC outputs: a no-break main output that seamlessly transfers power during outages, ensuring continuous operation for essential equipment, and a secondary output for loads that should not drain the batteries, such as water heaters. This dual-output design enhances system flexibility and safety.\u003cbr\u003e The inverter supports up to six units operating in parallel to achieve higher power capacity, including configurations for split-phase or three-phase systems. This scalability allows for tailored solutions ranging from small residential setups to large commercial installations, offering up to 15 kW of power with multiple units. System configuration, monitoring, and remote management are simplified through VEConfigure software and various control interfaces, including Bluetooth, Web-based portals, and remote devices like the Color Control GX or Venus GX. These features facilitate quick setup and real-time system oversight from anywhere with internet access.\u003cbr\u003e Built with durable steel enclosures in a protective IP22 rating, the MultiPlus-II is designed for demanding environments, supporting extensive temperature ranges and humidity levels. Its comprehensive safety standards include UL1741 (pending), EN-IEC, and CSA certifications, ensuring compliance and safety in diverse applications. With a weight of approximately 71 pounds and compact dimensions, this unit offers robust power management in a reliable, industrial-grade package suitable for a wide range of energy needs.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePowerControl and PowerAssist functions to optimize power usage from grid, generator, and batteries\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaximum continuous power output of 5000 VA with 9000 W peak power\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFast transfer switch with less than 20 milliseconds switching time\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExternal AC current sensor support up to 100A for enhanced load management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo AC outputs: no-break main and auxiliary for non-battery loads\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eParallel, split phase, and three-phase operation supporting up to 6 units for scalable power\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports off-grid and grid-tied solar energy systems with compatibility for solar chargers and inverters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote system monitoring and configuration via VEConfigure, Bluetooth, and web platforms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDurable steel enclosure with IP22 protection suitable for demanding environments\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWide operating temperature range with fan-assisted cooling for reliable performance\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44434373312554,"sku":"99442","price":1458.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/2285\/8794\/files\/99442XL.jpg?v=1780913214","url":"https:\/\/atticusgoods.com\/products\/victron-energy-multiplus-ii-48-5000-70-95-120v-inverter-charger-with-powercontrol-and-powerassist","provider":"Atticus Goods","version":"1.0","type":"link"}