SKU:11-0380
Motorshop's 3-5/8 Inch Cylinder Set is a stock-height, cast-iron cylinder kit designed for Harley-Davidson engines after crankcase spigot holes are enlarged to 3.8750 inches. The 3-5/8 inch bore is drilled to work with 4-1/2 inch and 4-1/4 inch stroke configurations. The finished bore size should be 3.8750 inches to fit the 3-5/8 cylinders. These are cylinders only; pistons and rings must be ordered separately. A disassembly of the engine is required to install these cylinders, and the crankcase spigot holes must be bored out to 3.8750 inch. Break-in is required as suggested in the shop manual.
Cylinders are stock height.
For installation of 3-5/8 inch cylinders after spigot holes have been enlarged. (See diagram for photos.) *NOTE: 3-5/8 inch cylinders are drilled to use with 4-1/2 inch and 4-1/4 inch stroke. Will require break in as suggested in the shop manual. These are cylinders only. Order pistons and rings separately. These cylinders will require crankcase cylinder spigot holes to be bored out to 3.8750 inch. Disassmbly of engine is required to install these cylinders. NOTE: The finished bore size should be 3.8750 inch to fit 3-5/8 cylinders. *NOTE: All cast iron cylinders have same piston to wall clearance.0025 -.003.
Measurements: Length: 6-5/8 inches
Instructions: http://www.vtwinmfg.com/Instructions/11/11-0380.pdf
Couldn't load pickup availability
