Ancor Adhesive Lined Heat Shrink Tubing 1/2 inch x 3 inches - 2 Pack - Black and Red

Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 3" - 2-Pack - Black/Red

Package of 1 Black/1 Red 3"(7.6cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)

Wire Range: 8-4 AWG

Features:

• Cross Linked polyolefin tubing is much stronger than PVC tubing and
  will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water,
  oil, acids, and sunlight as well as providing strain relief
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257F / 125C
  
• Operating temperature range of -40C to 110C
  
• UL 224

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Ancor Adhesive Lined Heat Shrink Tubing offers a reliable solution for wire insulation and protection in marine and automotive applications. Each package includes two 3-inch sections, one black and one red, with an outer diameter of 1/2 inch that shrinks down to approximately 5/32 inch. Designed to accommodate wire ranges of 8-4 AWG, this tubing provides an effective barrier against environmental elements and mechanical stress. The cross-linked polyolefin construction ensures durability and higher strength compared to standard PVC tubing, while the heat-activated adhesive lining creates a sealed, strain-relief cover that prevents water, oil, salt, acids, and sunlight infiltration, extending wire longevity in harsh conditions. The tubing shrinks at 257°F (125°C), achieving a shrink ratio of 3:1, making it suitable for various tight-fitting applications. Operating within a temperature range of -40°C to 110°C, it maintains performance under extreme cold and heat. UL 224 certification confirms safety and quality standards are met for industrial and marine use. This heat shrink tubing is an essential component for wiring projects requiring secure insulation, moisture resistance, and strain relief, especially in environments exposed to harsh conditions. Properly applied, it ensures long-term protection and electrical integrity for your wiring system. The product complies with safety warnings related to chemical exposure, specifically di(2-ethylhexyl)phthalate (DEHP), so users should review safety information prior to handling.

Features:

• Cross-linked polyolefin tubing provides higher strength than PVC and resists burning

• Heat-activated adhesive lining creates a sealed, moisture-proof barrier and strain relief

• Shrinks to one-third of its original size for a secure fit

• Shrinks at 257°F / 125°C for efficient application

• Operates effectively from -40°C to 110°C, suitable for extreme temperatures

• UL 224 certified for safety and quality assurance