1100 GPH Non-Automatic Bilge Pump - 12V
The 1100 GPH Non-Automatic Bilge Pump delivers powerful and efficient water evacuation for marine applications. Designed for flexibility, this pump requires activation through a panel or separate float switch, giving boat owners full control over the operation. With a flow rate of 1100 GPH, it ensures rapid water removal to keep your bilge dry and your vessel safe.
Built to last, this pump features anti-airlock protection, a robust stainless-steel motor shaft, and exclusive moisture-tight seals, making it ideal for harsh marine conditions. Maintenance is simplified with the quick-connect motor and base design, allowing the pump to be replaced in seconds without disconnecting the plumbing. Whether youre replacing or upgrading, the 1100 GPH Bilge Pump sets the standard for reliable, user-friendly performance.
Features:
- High-Performance Water Evacuation: With a flow rate of 1100 GPH, this pump rapidly removes bilge water, keeping your vessel dry and ready for safe operation in all conditions.
- Non-Automatic Design: This pump requires activation through a separate float or panel switch, giving you complete manual control over the operation for enhanced reliability.
- Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing.
- Advanced Anti-Airlock Protection: The vented impeller design prevents airlocks, ensuring uninterrupted water flow for consistent performance in challenging conditions.
- Dual-Size Outlet Compatibility: Includes both 1-inch and 1-1/8 inch straight fittings, along with a 90-degree 1-1/8 inch fitting for flexible and easy installation in various setups.
- Durable Marine-Grade Construction: Features a stainless-steel motor shaft, marine-grade silicon-blocked wiring, and exclusive moisture-tight seals to resist corrosion and ensure long-lasting operation.
- Built-In Check Valve: The integrated check valve prevents water backflow, maintaining a dry bilge and increasing pump efficiency for optimal operation.
- Meets Industry Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for marine safety and reliability.
- Compact and Lightweight: Measuring 4.83 x 2.99 x 4.72 inches and weighing just 1.03 lbs, this compact pump is easy to install even in tight bilge spaces.
- 4-Year Warranty: Backed by Commodores 4-year warranty, ensuring reliable performance and peace of mind for boat owners.
Specifications:
- Outlet: 3/4 and 1-1/8
- Voltage: 12V
- Gallons per hour: 1100 GPH (Gallons Per Hour)
- Outlet Diameter: 1-inch (25mm) 1-1/8 inch (29mm)
- Current: 40A
- Head: 12 feet (4 meters)
- Unit Weight: 1.03 lbs (0.47 kg)
Included Components:
- Dual-size straight fitting (3/4 inch and 1-1/8 inch)
- Optional 90-degree angled fitting (1-1/8 inch)
- Quick-connect wiring for hassle-free setup
The Commodore 1100 GPH Non-Automatic Bilge Pump is engineered to provide reliable and efficient water removal for marine vessels. With a flow rate of 1100 gallons per hour, this pump ensures quick dewatering of the bilge area, enhancing vessel safety and operational readiness. Its non-automatic design requires manual activation via a panel or float switch, giving boat owners precise control over water management, especially in situations where automatic operation may not be desired or preferred. This feature allows for tailored water evacuation based on specific needs, making it suitable for various marine applications.
Built to withstand harsh marine environments, the Commodore bilge pump boasts robust construction, including a stainless-steel motor shaft, moisture-tight seals, and marine-grade silicon-blocked wiring. These features contribute to its resistance to corrosion and long-lasting durability even in saltwater conditions. The pump's advanced vented impeller design prevents airlock formation, ensuring consistent water flow during operation. For ease of installation and maintenance, the pump incorporates quick-connect wiring and threaded outlets compatible with 3/4 inch and 1-1/8 inch fittings, including a 90-degree fitting option for flexible setup. It also features an integrated check valve to prevent backflow, maintaining a dry bilge and optimizing pump efficiency.
Measuring approximately 4.83 inches long, 2.99 inches wide, and 4.72 inches high, and weighing just over 1 pound, this compact pump is ideal for tight bilge spaces. It is fully submersible, ignition protected, and conforms to industry standards such as ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22, ensuring safety and reliability. Equipped with dual-size outlet fittings and quick-connect components, the Commodore 1100 GPH Bilge Pump simplifies installation and replacement processes. Backed by a four-year warranty, this marine-grade bilge pump offers peace of mind and dependable performance for boat owners seeking a durable and controllable water evacuation solution.
Features:
- High-Performance Water Evacuation: Rapidly removes bilge water at 1100 GPH to keep your vessel dry and operational.
- Non-Automatic Design: Manual activation via panel or float switch for full control over operation.
- Quick-Connect Wiring: Threaded outlets and quick-disconnect wiring facilitate fast installation and maintenance, allowing motor or base replacement in seconds.
- Advanced Anti-Airlock Protection: Vented impeller design prevents airlocks, ensuring consistent water flow.
- Dual-Size Outlet Compatibility: Includes 1-inch and 1-1/8 inch fittings, with an optional 90-degree fitting for versatile installation.
- Marine-Grade Construction: Features a stainless-steel motor shaft, moisture-tight seals, and silicon-blocked wiring for corrosion resistance.
- Built-In Check Valve: Prevents backflow, maintaining a dry bilge and optimizing pump efficiency.
- Industry Standard Compliance: Fully submersible, ignition protected, meeting ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards.
- Compact and Lightweight: Measures approximately 4.83” x 2.99” x 4.72” and weighs just over 1 pound for easy installation in tight spaces.
- 4-Year Warranty: Ensures reliable performance and peace of mind with comprehensive coverage.
