Hella Marine NaviLED Gen II Bi-Color Deck Mount Navigation Lamp, Stainless Steel – 17910511

NaviLED Gen II Bi-Color Deck Mount Navigation Lamp - Stainless Steel

The NaviLED Compact Deck Lamp reflects Hella marines commitment to continuous improvement and full compliance with international standards. This more compact, refined design features clean lines with no visible fasteners once installed, along with an optional stainless steel bezel for a premium finish.

NaviLED Compact Deck Mount lamps comply with the latest American Boat and Yacht Council (ABYC) standards, support vessel requirements up to 20m (65ft) LOA, and bring together multiple certifications across the range to deliver the highest level of compliance.

The lamps Multivolt circuitry further enhances safety, maintaining the required 2NM minimum visibility even when system voltage drops to as low as 9V.

Hella Marine lamps are IP67-rated and fully sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.

Designed with components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards. This prevents possible interference with radio, communication, navigation, and other electrical equipment on board

Features:

• Mounting: Horizontal surface mount, two-hole screw mount, no visible fasteners
• Visibility: 2NM Powerboat (Port Starboard), 2nm Powerboat (Bi-Color)
• Lens Material: High-impact and UV-resistant acrylic
• Operating Voltage: Multivolt 932V DC for 12 / 24V DC applications
• Voltage Protection: Reverse polarity protected
• Power Consumption: Port and Starboard < 2W combined, Bi-Color < 2W
• Cable: 120mm of tinned marine cable
• Protection: IP67, IP69 (Completely Sealed), Suitable for submersion in operation and high-pressure water jet cleaning
• 5 Year Warranty

The Hella Marine NaviLED Gen II Bi-Color Deck Mount Navigation Lamp combines a compact design with a stainless steel finish for marine navigation applications. Its horizontal surface mount uses a two-hole screw pattern, and the installation leaves no visible fasteners for a clean appearance.

Designed for 12- and 24-volt DC applications, the Multivolt circuitry maintains the required 2 nautical mile minimum visibility even when system voltage drops to 9 volts. The bi-color configuration provides port and starboard navigation lighting, while power consumption remains below 2 watts.

The lamp features a high-impact, UV-resistant acrylic lens and a fully sealed housing. IP67 and IP69 protection supports operation in demanding marine conditions, including submersion during operation and high-pressure water-jet cleaning. Reverse-polarity protection and interference-suppression components support reliable operation alongside radio, communication, navigation, and other onboard electrical equipment.

Supplied with 120 millimeters of tinned marine cable, the Hella Marine NaviLED Gen II lamp supports vessel requirements up to 65 feet in length overall and complies with the latest American Boat and Yacht Council standards. The lamp is backed by a 5-year warranty.

Features:

• Bi-Color Navigation Light: Provides port and starboard navigation visibility up to 2 nautical miles.
• Deck Mount Design: Horizontal surface mount with a two-hole screw mounting pattern and no visible fasteners after installation.
• Multivolt Operation: Designed for 12- and 24-volt DC applications and maintains minimum 2 nautical mile visibility down to 9 volts.
• Low Power Consumption: Uses less than 2 watts.
• Durable Lens: High-impact, UV-resistant acrylic lens.
• Sealed Protection: IP67 and IP69 protection for submersion during operation and high-pressure water-jet cleaning.
• Reverse-Polarity Protection: Helps protect the lamp from incorrect electrical polarity.
• Marine Cable: Includes 120 millimeters of tinned marine cable.
• Interference Suppression: Components limit electromagnetic emissions and susceptibility within international standards.
• Compliance and Warranty: Supports vessel requirements up to 65 feet LOA, complies with the latest ABYC standards, and includes a 5-year warranty.