Humminbird XP 9 HW In-Hull Transducer for Dual Spectrum CHIRP Sonar - Compatible with HELIX Series

XP 9 HW In-Hull Transducer

In-Hull Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Intended for glue-in installation inside single layer fiberglass hulls. Includes epoxy kit and 20 cable.

Features:

• This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 GPS-equipped models only, HELIX 7 CHIRP G2/G3 GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N All models, HELIX 8 CHIRP G3N All models, HELIX 9 CHIRP G2N/G3N All models, HELIX 10 CHIRP G2N/G3N All models, HELIX 12 CHIRP G2N/G3N All models, ICE HELIX CHIRP G2 All models (In Open Water Mode).
• Side Imaging and Down Imaging units can support the XP 9 HW as a 2D sonar only transducer. This transducer does not support Side Imaging or Down Imaging.
• Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
• Dual Spectrum CHRIP Max Depth: 1200ft (365m)

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Humminbird XP 9 HW In-Hull Transducer is designed for seamless integration with select Helix models, providing high-resolution dual spectrum CHIRP 2D sonar for accurate underwater imaging. This transducer is ideal for installation inside single-layer fiberglass hulls using the included epoxy kit and 20-foot cable, ensuring a clean and protected setup. Supporting a CHIRP range of 150-220 kHz and capable of reaching depths up to 1,200 feet, it delivers detailed sonar imagery suitable for various fishing and boating applications. Its wide cone angle and high-frequency beam enhance target separation and clarity, making it easier to identify fish and underwater structures from inside the hull. This transducer is compatible with a range of Humminbird Helix models, including the CHIRP G2, G3, and G2N/G3N series, as well as the ICE HELIX CHIRP G2 for open water use. It functions as a 2D sonar only, supporting Side Imaging and Down Imaging units as a supplementary transducer. The dual spectrum CHIRP frequencies include a full range of 150-220 kHz, a narrow band of 180-240 kHz, and a wide setting of 140-200 kHz, providing versatility in various fishing conditions. Designed specifically for in-hull installation, this transducer offers a reliable and unobtrusive solution for anglers seeking high-quality sonar performance beneath their boat. Please note that this product may contain chemicals such as lead; for safety information, visit P65Warnings.ca.gov.

Features:

• Designed for in-hull installation with single-layer fiberglass hulls, includes epoxy kit and 20-foot cable.

• Supports Dual Spectrum CHIRP 2D sonar with a range of 150-220 kHz and maximum depth of 1,200 feet.

• Compatible with select Humminbird Helix models, including CHIRP G2, G3, G2N, G3N series, and ICE HELIX G2.

• Provides high-frequency beam with a wide cone angle for detailed underwater imaging.

• Supports dual spectrum frequencies: full (150-220 kHz), narrow (180-240 kHz), and wide (140-200 kHz).

• Functions as a 2D sonar only; does not support Side Imaging or Down Imaging.