Leland Maximum Inflation Re-Arm Kit C 33G Manual 1/2 Inch Threads for Inflatable Life Jackets

Re-Arm Kit C 33G Manual 1/2 Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 33-gram CO2 cylinder with 1/2 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong rearming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices
• Do not use with self-inflating PFD
• Includes one 33-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit C 33G is an essential accessory designed to extend the usability of your inflatable life jackets for an additional season. This kit includes a 33-gram CO2 cylinder with 1/2-inch threads, a green indicator pin, and detailed step-by-step re-arming instructions to ensure proper and safe reinstallation. It is compatible with manual pull PFD devices, making it suitable for most manual inflation systems. It is important to verify that your life jacket's owner manual matches this re-arming kit to prevent potential safety hazards. Using an incompatible re-arming kit can compromise the effectiveness of your safety equipment and should be avoided.

Features:

• Designed for re-arming inflatable life vests

• Compatible with manual pull PFD devices

• Includes one 33-gram CO2 cylinder with 1/2-inch threads

• Comes with a green indicator pin and comprehensive instructions

• UL Marine Classified for safety and compliance

• Single-use product: must be replaced after deployment

• Caution: Handle with care due to pressurized gas; avoid exposure to heat or fire