Leland Maximum Inflation Re-Arm Kit G 25G Manual 3/8 Inch Threads for Inflatable Life Vests

Re-Arm Kit G 25G Manual 3/8 Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices
• Do not use with self-inflating PFD
• Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit G 25G with 3/8 inch threads is an essential accessory for maintaining the safety and functionality of your inflatable life jacket. Designed to extend the service life of your PFD, this kit includes a 25-gram CO2 cylinder, a green indicator pin, and detailed re-arming instructions. It is compatible with manual pull PFD devices, providing a reliable solution for re-inflation after deployment. Ensure your life vest's owner manual matches this kit to guarantee safe and effective operation. Using the correct re-arming kit is critical, as mismatched components can compromise safety and performance. This UL Marine Classified kit is built to meet rigorous safety standards, offering peace of mind during water activities.

Features:

• Designed for re-arming inflatable life vests to extend usability

• Compatible with manual pull PFD devices for reliable re-inflation

• Includes one 25-gram CO2 cylinder with 3/8 inch threads, a green indicator pin, and step-by-step instructions

• UL Marine Classified for safety and quality assurance

• Single-use product; the CO2 cartridge must be replaced after deployment