Leland Maximum Inflation Re-Arm Kit O 24G Manual 1/2 Inch Threads for Inflatable Life Jackets

Re-Arm Kit O 24G Manual 1/2 Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices with 840 Series Inflator
• Do not use with self-inflating PFD
• Includes one 24-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit O 24G Manual 1/2 Inch Threads is an essential accessory for maintaining the safety and functionality of your inflatable life vest. Designed specifically for manual pull PFD devices equipped with the 840 Series inflator, this kit extends the usability of your inflatable life jacket by providing a new CO2 cylinder, ensuring reliable inflation during emergencies. The kit includes one 24-gram CO2 cylinder with 1/2 threads, a green indicator pin, and detailed step-by-step re-arming instructions. Before installation, verify compatibility with your life vest's owner’s manual to prevent incorrect use, which can compromise safety and performance.

Features:

• Designed for re-arming inflatable life vests with manual pull mechanisms

• Compatible with PFD devices featuring 840 Series inflators

• Includes one 24-gram CO2 cylinder with 1/2 threads, a green indicator pin, and instructions

• UL Marine Classified for safety and compliance

• Single-use product: requires replacement after each inflation