Leland Maximum Inflation Re-Arm Kit S2 38G Auto 1/2" Threads for Inflatable Life Vests

Re-Arm Kit S2 38G Auto 1/2 Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 1/2 threads, yellow Bobbin/Water Sensing Element, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Auto/Manual Pull PFD devices
• Includes one 38-gram CO2 cylinder with 1/2 threads, Yellow Bobbin/Water Sensing Element, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit S2 38G Auto 1/2" Threads is an essential accessory for maintaining the safety and functionality of your inflatable life jacket. This kit includes a 38-gram CO2 cylinder with 1/2" threads, a yellow bobbin/water sensing element, and detailed step-by-step re-arming instructions. Designed specifically for use with auto/manual pull personal flotation devices (PFDs), this kit ensures that your life vest is ready for another season of use. Proper re-arming extends the lifespan of your safety equipment and guarantees compliance with safety standards.
UL Marine Classified, the kit is built to meet rigorous safety and quality standards. It is important to always verify compatibility with your specific PFD model and follow the manufacturer’s instructions carefully. Using an incompatible or incorrect re-arming kit can compromise safety and should be avoided. Once the CO2 cartridge has been punctured to inflate the vest, it must be replaced, as these cylinders are designed for single use. Handle with care, as the gas cylinders are under pressure and should not be exposed to heat, open flames, or disposed of improperly.
This product comes with a warranty covering defects and leakage for up to three years, depending on storage conditions. Cylinders with crimped closures, such as those filled with N2O, O2, or propane, should not be stored below 40°F to prevent damage to the seal. Proper disposal of used or corroded cylinders is essential to safety. Always keep the kit out of reach of children and handle with caution. The kit is lightweight and compact, making it easy to store and carry for routine maintenance of your inflatable life vest.

Features:

• Designed for re-arming inflatable life vests

• Compatible with auto and manual pull PFD devices

• Includes one 38-gram CO2 cylinder with 1/2" threads, yellow bobbin/water sensing element, and step-by-step instructions

• UL Marine Classified for quality and safety

• Single-use re-arming kit, requiring replacement after activation