PROCOM PowerJet Fuel Controller PE-PJ-002

PowerJet PE-PJ-002 lets you tune fuel delivery with ten selectable settings (-4% to +10%), including a stock setting, for immediate throttle response when you push your engine with a sport exhaust or high-demand track conditions.

It reads outside air temperature near the stock AIT sensor and alters the signal sent to the ECU to use the ECU’s built‑in Air Temperature Correction factor. The outcome is a slightly cooler intake signal that causes the ECU to inject more fuel consistent with the chosen PowerJet setting.

Under constant load, the oxygen sensor will steer the fuel ratio back toward stock. When you demand more power, the system switches back to open loop and applies the selected adjustment, delivering quicker throttle response.

Installation is straightforward: plug it in between the stock AIT sensor and the bike’s wiring harness using the included exact plug‑in connectors. Typical setup takes a few minutes, and the unit is designed to sit under the bodywork, rugged and waterproof for durability.

PowerJet is engineered to optimize fuel flow and engine performance across various applications, with durable construction for harsh environments and compatibility with multiple fuel systems. It also supports reduced emissions and improved efficiency.

• Compact design for tight installations
• Precise fuel flow regulation to boost engine efficiency
• Durable construction for reliable operation in harsh environments
• Compatibility with various fuel systems
• Supports improved engine performance and reduced emissions

PowerJet comes with a full one-year warranty.

Most fuel injected engines run very lean and this is fine except for when demanding maximum power output on the track, especially when you have sport exhausts installed. Being able to simply adjust the fuel/air ratio in those conditions would be wonderful wouldnt it?

The PowerJet Fuel Controller allows just that! You can adjust the fuel map from -4% to +10% by selecting one of the 10 settings. We even incorporated a stock setting which means no change compared to stock.

Our PowerJet is a simple yet complicated device. It measures the outside air temperature very close to where the stock sensor is located, and adjusts the signal from the OEM air temperature sensor to the ECU to make use of the built in Air Temperature Correction factor that is built into every stock ECU.

What this accomplishes is that the ECU is told that the intake air is a little cooler than it is, and the ECU will respond by injecting a fraction more fuel depending on the PowerJet setting. You as a rider will notice a substantially improved engine response when you twist the throttle.

The neat thing is that when under constant load (constant speed) the oxygen sensor in the exhaust will make the ECU correct the fuel/air ratio back to stock! However, as soon as the system notices an increase in power it switches from closed loop (oxygen sensor feedback) back to open loop (no feedback) and will correct the fuel/air ratio by the amount you selected on the PowerJet.

PowerJet can be easily installed by plugging it in between the stock AIT sensor which is usually located somewhere on the airbox and the bikes wiring harness. Each PowerJet comes with the exact plug in connectors and installation will normally only take a few minutes. Finding the air temperature sensor usually takes more time than plugging in the PowerJet.

You can leave the PowerJet sitting under the bodywork somewhere as it is designed to be rugged and waterproof. After figuring out what setting works best with your specific engine/exhaust/intake combination you typically would leave it alone.

PowerJet comes with a full one year warranty.

The PROCOM PowerJet Fuel Controller PE-PJ-002 is engineered to optimize fuel flow and improve engine performance across various applications. Designed for reliability and precision, this fuel controller ensures consistent fuel delivery, contributing to better engine efficiency and lower emissions. Its compact size makes it suitable for installation in tight spaces, providing a seamless integration into existing fuel systems. Crafted with durable materials, the PowerJet Fuel Controller withstands harsh operating conditions, making it a dependable choice for demanding environments. Whether used in industrial machinery, generators, or other fuel-powered equipment, this controller offers enhanced control and operational stability. Easy to install and maintain, it supports ongoing system performance and longevity, helping you reduce downtime and maintenance costs.

Features:

• Compact design for easy installation in limited spaces

• Precise fuel flow regulation to optimize engine efficiency

• Durable construction for reliable operation in harsh environments

• Compatibility with various fuel systems for versatile application

• Supports improved engine performance and reduced emissions