ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator for Marine and RV Applications

ProSafe FAILSAFE 60amp Galvanic Isolator

ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.

ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

• ABYC A-28 July '08 Compliant and Fail Safe CertifiedCertified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
  
• Flat Pack High Power SemiconductorsRobust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
  
• Ignition ProtectedMeets ISO 8846 and can be mounted within an engine compartment.
  
• Gold Plated Terminations

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator provides reliable shore power safety for marine vessels and RVs, ensuring the integrity of ground connections while preventing galvanic corrosion. Designed with ease of installation in mind, this isolator does not require a dedicated monitor to verify its operational status, simplifying maintenance and troubleshooting. Built on advanced FlatPack semiconductor technology, the ProSafe FS series guarantees safe operation even in the event of a failure, maintaining ground continuity and preventing potential electrical hazards.

Certified by Underwriters Laboratories (UL) and compliant with ABYC A-28 July '08 standards, the ProSafe FS 60 ensures that the safety ground wire remains intact during shore power connections. Its high-power semiconductor diodes are capable of conducting inrush currents up to 3,000 amps for the required duration, meeting the strict FailSafe criteria. The unit is ignition protected, meeting ISO 8846 standards, allowing installation within engine compartments without risk. Gold-plated terminations provide durable, corrosion-resistant connections for long-term reliability.

This galvanic isolator's robust design and certification make it an essential component for maintaining electrical safety and preventing galvanic corrosion in marine and RV environments. Properly installed, it safeguards your vessel’s electrical system against potentially damaging stray currents while ensuring compliance with industry standards. For detailed installation instructions and maintenance guidelines, refer to the owner’s manual available online. Please note that this product contains chemicals known to the State of California to cause reproductive harm and should be handled with appropriate care.

Features:

• Easy installation with no dedicated monitor required for operational verification

• Built on robust FlatPack semiconductor platforms for safety in failure

• UL certified and ABYC A-28 July '08 compliant for marine safety

• High power diodes conduct inrush currents up to 3,000 amps

• Ignition protected for installation within engine compartments

• Gold-plated terminations for corrosion-resistant connections