Rule 4-Inch In-Line Blower Part Number 240 for High-Flow Ventilation

Rule In-Line Blower - 4" Ducting
Part Number: 240

Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.

Features

• Efficient high-volume air flow
  
• Quiet operation
  
• Low amp draw
  
• Slip-on inlet and outlet ducting connections
  
• Sealed motor shaft for moisture protection
  
• Corrosion resistant nickel-plated motor housing
  
• IMCI (CE)
  
• USCG 183.410 Compliant: Ignition protected

Applications:
Race cars and helmet ventilation
Bus ventilation (engine and bathroom fumes)
Prison van ventilation (cooling, air-freshening)
Blow-up signs and mascots
Tanning booths
Building ventilation

Specifications

• Approvals: CE
  
• Dimensions (H x W x D): 102 x 152 x 106 (mm)
  
• ElectricalCharacteristics: 4.3 Amp
  
• Flow Rate (US gallons & litres): 235 CFM @ Open Flow
  
• Fuse Size: 7 (amp)
  
• Product Inlet Fitting: 4" (102 mm) Ducting
  
• Product Outlet Fitting: 4" (102 mm) Ducting
  
• Voltage: 13.6 (Vdc)

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

The Rule 4-inch in-line blower, part number 240, is engineered for applications requiring efficient and high-volume airflow. Its compact design allows easy installation on any flat surface, making it suitable for a range of demanding environments. The blower features a corrosion-resistant nickel-plated motor housing and a sealed motor shaft to provide long-lasting performance and protection against moisture. Designed to operate quietly and with a low amp draw, this blower maximizes airflow while minimizing energy consumption, making it ideal for both industrial and recreational uses.

Equipped with slip-on inlet and outlet ducting connections, the Rule 240 blower simplifies installation and maintenance. It offers a flow rate of approximately 235 CFM (cubic feet per minute) at open flow, providing robust ventilation for applications such as race car and helmet cooling, bus and prison van ventilation, blow-up signs, tanning booths, and general building airflow. The blower is CE approved and compliant with USCG ignition protection standards, ensuring safety and reliability in various operational settings.

This blower operates at 13.6 volts DC and draws about 4.3 amps, ensuring efficient power use. Its dimensions are compact, enabling versatile mounting options in tight spaces. The product includes 4-inch ducting fittings on both inlet and outlet, facilitating a secure connection to your ventilation system. For safety, the product bears a warning about exposure to chemicals like styrene, which is known to cause cancer in California, and directs users to P65Warnings.ca.gov for more information.

Overall, the Rule 4-inch in-line blower offers a durable, efficient, and versatile solution for various ventilation needs, combining high airflow capabilities with quiet operation and corrosion resistance for long-term performance.

Features:

• High-volume airflow with a flow rate of 235 CFM at open flow

• Quiet operation for reduced noise levels

• Low amp draw of 4.3 amps for energy efficiency

• Slip-on inlet and outlet ducting connections for easy installation

• Sealed motor shaft for moisture and corrosion protection

• Corrosion-resistant nickel-plated motor housing for durability

• CE approval and USCG ignition protection compliance

• Designed for versatile applications including vehicle ventilation, signage, and building airflow