Sea-Dog 431050-3 Remote Wireless Horn Button for Steering Wheel Hub Mount

Remote Wireless Horn Button - Steering Wheel Hub Mount

This horn button works with a simple push. Essentially, the remote wireless momentary push-button horn switch is activated by pushing the button transmitter to send a signal to the receiver, which activates the existing horn.

Features:

• The receiver connects to the existing horn switch wiring for easy installation
• The receiver works up to 50 ft. away from the horn button
• The transmitter button uses a CR2032 battery (included) and is installed to wheel center cap either by double-back tape or two #8 fasteners (included)

Specifications:

• Horn Button Diameter: 2-15/16 in.
• Horn Button Depth: 7/8 in.
• Transmitter Width: 2-1/4 in.
• Transmitter Length: 1-1/4 in.
• Maximum: 20A. 12VDC.
• Volts: 12
• Amps: 20

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sea-Dog 431050-3 Remote Wireless Horn Button provides a convenient way to activate an existing 12-volt horn without routing additional wiring through the steering wheel. Designed for steering wheel hub or center cap mounting, this remote momentary push-button system sends a wireless signal from the transmitter to the receiver when pressed, activating the vehicle’s existing horn circuit.

The receiver connects to the existing horn switch wiring for a straightforward installation and supports operation from up to 50 feet away from the button. The transmitter can be secured to the steering wheel center cap with the included double-sided adhesive or with the included #8 fasteners, allowing flexible installation based on the vehicle and wheel configuration. A CR2032 battery is included for convenient setup and operation.

Rated for 12 volts DC and up to 20 amps, this Sea-Dog wireless horn button is suitable for a variety of automotive, marine, and custom vehicle applications that use a compatible horn circuit. Its compact steering wheel hub design helps provide a clean control solution while keeping the horn activation point within easy reach of the driver. Professional installation is recommended when working with vehicle wiring or steering wheel components.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Features:

• Wireless horn activation: Sends a signal from the remote push-button transmitter to the receiver, activating the existing horn.

• Steering wheel hub mounting: Installs on a wheel center cap using included double-sided adhesive or two included #8 fasteners.

• Easy wiring connection: Receiver connects to the existing horn switch wiring for simplified installation.

• Extended operating range: Transmitter operates from up to 50 feet away from the receiver.

• Included battery: Uses one CR2032 battery, included for installation and operation.

• Electrical rating: Supports 12-volt DC systems with a maximum rating of 20 amps.