StarTech.com CAT6UTP10FTBL10PK 10 ft. Cat6 UTP Ethernet Patch Cable, Blue, 10-Pack

StarTech 10ft Blue Cat6 Ethernet Cable, 10 Pack, Snagless RJ45, UTP, 24AWG Bare Copper Wire, Network Patch Cord

The StarTech.com CAT6UTP10FTBL10PK Category 6 UTP Patch Network Cable 10-pack provides organized connectivity for office and general network installations. Each blue cable is designed for reliable Gigabit network connections and uses 24 AWG bare copper conductors to support a broad range of Ethernet applications, including Power over Ethernet.

Snagless RJ45 connectors help protect the connector clips from damage and reduce snagging during installation or removal in dense IT setups. Molded PVC strain relief helps prevent the connector termination points from bending at sharp angles, while the durable PVC jacket supports practical cable identification through color coding.

These Cat6 cables feature 50-micron gold-plated RJ45 contacts to support conductivity and help reduce signal loss associated with oxidation or corrosion. The cables are specified for stable speeds up to 10Gbps and support up to 100W PoE++ under IEEE 802.3bt Type 4. Their CM-rated PVC jacket is suitable for general installations.

For dependable network performance, the cables comply with ANSI/TIA-568-C.2 Category 6 requirements up to 250MHz and are Fluke DSX-8000 Channel Tested for minimal Near-End Crosstalk and Return Loss. The 10-pack is suited to office deployments and network setups using rackmount or PoE switches, LAN or Wi-Fi access points, LED signage, and remote IP cameras. This StarTech.com cable pack is backed by a limited lifetime warranty.

Features:

• 10-Pack: Includes ten blue Category 6 UTP patch cables for organized office and network installations.
• 10 ft. Length: Provides a practical cable length for Ethernet patching and general network connectivity.
• Snagless RJ45 Connectors: Help protect connector clips from damage and reduce snagging during installation or removal.
• Molded PVC Strain Relief: Helps prevent RJ45 connector termination points from bending at sharp angles.
• 24 AWG Bare Copper Conductors: Support Ethernet applications including Power over Ethernet.
• 10Gbps and PoE++ Support: Specified for speeds up to 10Gbps and up to 100W PoE++ under IEEE 802.3bt Type 4.
• 50-Micron Gold-Plated Contacts: Support conductivity and help reduce signal loss caused by oxidation or corrosion.
• Category 6 Compliance: Complies with ANSI/TIA-568-C.2 requirements for Category 6 performance up to 250MHz.
• Tested Performance: Fluke DSX-8000 Channel Tested for minimal Near-End Crosstalk and Return Loss.
• Durable PVC Jacket: Uses a blue polyvinyl chloride jacket suitable for general installations and cable color coding.