SKU:63347
Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1413-4 - 4-Blade - 14" x 13 Pitch
The Prop that put the four in Perfourmance! Turning Points Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.
The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70s, 80s, 90s, and 00s, and will outrun most newer props, including five blade ski props.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta, and Yamaha Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
The Turning Point Hustler aluminum propeller, model LE1/LE2-1413-4, offers exceptional performance for a wide range of boating applications. Designed with a four-blade swept cleaver configuration, this 14-inch diameter propeller with a 13-inch pitch delivers outstanding acceleration, handling, and rough water stability. Perfect for watersports, sterndrive boats, tri-toons, and bay boats, the Hustler series is engineered to enhance stern lift and load-carrying capacity without sacrificing top-end speed.
Constructed using advanced Squeeze Casting technology, the Hustler propeller boasts a high-density, tight grain structure that ensures superior strength and stiffness. This manufacturing process eliminates common issues found in traditional die-cast props, such as air bubbles and voids, resulting in blades that resist flexing under load. The robust design translates into increased propulsive efficiency, more reliable performance, and easier repairs, making it a superior upgrade over older aluminum models from previous decades.
The Hustler's durable Ultracoat powder-coated finish provides a corrosion-resistant, automotive-grade shine that maintains its appearance over time. Its five-step coating process offers superior abrasion resistance compared to typical paint coatings, ensuring the propeller looks newer longer. Additionally, the large exhaust ports within the propeller housing allow for 40% more exhaust flow area, reducing backpressure and enabling more horsepower to be generated—akin to high-performance headers for your boat.
Designed to fit outboard and sterndrive engines from 6 to over 300 horsepower, including brands like Mercury, Yamaha, Evinrude, Honda, and Mercruiser, the Hustler series offers multiple blade configurations, rotation directions, and pitch options to match specific boating needs. A hub kit is required for installation, and Turning Point provides a selection chart and Prop Wizard to assist in choosing the right components. With features such as enhanced hole shot, improved handling, and increased reverse thrust—up to 46% more than comparable designs—the Hustler is built to pull harder, run faster, and handle better in demanding conditions.
Note: This product contains chemicals known to cause reproductive harm and cancer under California law. For more information, visit P65Warnings.ca.gov.
Features:
Couldn't load pickup availability
