SKU:37293
Hustler - Right Hand - Aluminum Propeller - LE-1417 - 4-Blade - 14.5" x 17 Pitch
The Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers propellers.
The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70s, 80s, 90s, and 00s, and will outrun most newer props, including five blade ski props.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta, and Yamaha Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
The Turning Point Hustler LE-1417 is a high-performance, right-hand 4-blade aluminum propeller designed to deliver exceptional acceleration, handling, and stern lift for a variety of boats. Crafted with innovative Dual Geometry blade design, this propeller combines offshore-style blades for top speed and high-speed stability with high-performance blades optimized for quick hole shots and tight cornering, making it ideal for watersports, bay boats, tri-toons, and stern drive vessels. Its unique engineering enables it to outperform many older and some newer propellers, offering a perfect balance of power, control, and durability.
Constructed usingTurning Point’s proprietary Squeeze Casting process, the Hustler LE-1417 boasts superior strength, stiffness, and resistance to flex under load. This manufacturing method produces a dense, high-quality grain structure, providing enhanced mechanical properties that translate into more efficient propulsive performance. Unlike traditional die-cast aluminum props, the Hustler’s blades are less prone to flex and damage, ensuring long-lasting performance and easier repairs. The prop features a durable Ultracoat powder-coated finish that rivals automotive-grade coatings, offering excellent corrosion resistance and a shiny, attractive appearance that maintains its look over time.
Designed with large free-flowing exhaust ports, the Hustler LE-1417 offers 40% more exhaust flow area, reducing backpressure and allowing the engine to produce more horsepower. This design acts like headers for your boat, improving overall engine efficiency and performance. Compatible with a wide range of outboard and sterndrive engines from top brands such as Mercury, Yamaha, Volvo Penta, and more, this propeller is suited for vessels requiring enhanced load capacity and maneuverability. It is recommended to use a hub kit for installation, with options available for different engine configurations. Whether you're seeking better acceleration, higher top speeds, or improved handling in rough water, the Hustler LE-1417 is engineered to meet demanding boating needs with speed, strength, and style.
Features:
Couldn't load pickup availability
